HOW TO RE-GROUTING TILE FLOORS

The grouting material is located between the tiles to fill the spaces and provide additional support. When applied for the first time in a floor tile, grout provides a neat and clean appearance to the surface. However, over time the grout may crack, stain or get damaged. This can make all the floor look bad. Moreover, damaged or cracked grout can be a big problem by allowing moisture to get under the tiles. It is important to repair damaged grout not only for aesthetic reasons but also to prevent problems caused by the tiles.

Instructions:

  1. Clean the existing grout with a scrub brush and a commercial cleaner for grout. This will remove dirt, rust and other debris from the grout. Allow the area to dry completely.
  2. Use a saw to remove the grout that is damaged. These saws are inexpensive and can be purchased at most hardware stores.
  3. Use a damp cloth to moisten the cracks in which will apply the new grout. Do not flood the area, but make sure it is moist. Some moisture is important for the slurry to adhere to the tile properly.
  4. Mix a little grout as indicated by the instructions on the package. Do not mix grout too early, or harden before you achieve implementation.
  5. Spread the grout on the surface that needs to be filled. Use a float to smooth the grout, applying even while working together on the pressure.
  6. Level each meeting once the fill, moisten with your fingers and smooth the grout into the joints
  7. Remove excess grout into the joints and tile surfaces, reviewing them with a rubber brush or sponge. Avoid repeatedly review a specific area; this could interfere with the grout that has begun to dry in cracks.
  8. Allow the grout to dry according to the manufacturer’s instructions. Apply a sealant to protect grout from future stains and mildew. Remove residue once the tiles and grout sealer is completely dry.

About the author

admin

View all posts